Username:

Password:

Fargot Password? / Help
Hatamoto-Chi HTM-Maxwell
BattleMech Technical Readout

Type/Model: Hatamoto-Chi HTM-Maxwell
Tech: Mixed Tech / 3050
Config: Biped BattleMech
Rules: Level 3, Standard design
   
Mass: 80 tons
Chassis: Earthwerks VOL Standard (IS)
Power Plant: 320 Pitban Light Fusion (IS) with Supercharger
Walking Speed: 43.2 km/h
Maximum Speed: 64.8 [86.4] km/h
Jump Jets: None
   Jump Capacity: 0 meters
Armor Type: Mitchell Argon w. CASE Ferro-Fibrous
Armament:
1 ER Medium Laser (C)
2 ER Large Lasers (C)
12 Medium Lasers(IS)
1 Medium Pulse Laser(IS)
Manufacturer:    Maltex Corporation
   Location:    Errai
Communications System:    Colmax 90
Targeting & Tracking System: Garret D2j


Overview:

         The HTM-27T Hatamoto-Chi is one of the first BattleMechs fielded by the DCMS utilizing advanced construction materials, most notably an Endo Steel chassis.   First deployed by the DCMS on An Ting in 3039, the Hatamoto-Chi is a major conversion of the Wells Technologies CGR-1A1.   The modifications performed by Kurita engineers were so extensive that the 'Mech was given a new designation.
         Externally, the Hatamoto-Chi is similar to its parent design, retaining the large shoulder assemblies and lacking a left hand, which gives the machine its characteristic silhouette.   The most obvious distinguishing characteristic of this class are the radiator fins mounted on the center rear torso and head.   The rear fin, resembling an ancient samurai's sashimono (back banner), is what gives the BattleMech its name.
         There are four known variants of the Hatamoto-Chi, all of them replacing the SRM weaponry and ammo with other weapons.   The Hatamoto-Hi variant replaces the SRMs, ammo, and CASE system with four medium lasers and one heat sink.   Hatamoto-Kaze has two batteries of LRM-5s, as well as four tons of ammunition.   The Hatamoto-Ku carries a short-barrel Class 5 autocannon with one ton of ammunition, but the ammo is not protected by a CASE system.   Finally, the Hatamoto-Mizo mounts an extended-range large laser and additional heat sinks.


Type/Model: Hatamoto-Chi HTM-Maxwell
Mass: 80 tons
Equipment:   Crits Mass
Internal Structure: 122 pts Standard (IS) 0 8.00
Engine: 320 Light 10 17.00
Engine Supercharger: LT 1 2.00
   Walking MP: 4 [5]    
   Running MP: 6 [8]    
   Jumping MP: 0    
Heat Sinks: 16 Double (C) [32] 8 6.00
   (Heat Sink Loc: 1 LT, 1 CT, 1 LL, 1 RL)
Gyro:   4 4.00
Cockpit, Life Support, Sensors: 5 3.00
Triple Strength Myomer (IS):   6 .00
Actuators: L: Sh+UA+LA, R: Sh+UA+LA+H 15 .00
Armor Factor: (C) 7 13.00
   (Armor Crit Loc: 2 LA, 1 RA, 1 LT, 3 RT)

    Internal Armor
    Structure Value
  Head: 3 9
  Center Torso: 25 38
  Center Torso (Rear):   12
  L/R Side Torso: 17 26/26
  L/R Side Torso (Rear):   8/8
  L/R Arm: 13 26/26
  L/R Leg: 17 34/34

Weapons & Equipment: Loc Heat Ammo Crits Mass
1 ER Medium Laser (C) RA 5   1 1.00
2 ER Large Lasers (C) LA 24   2 8.00
6 Medium Lasers (IS) RT 18   6 6.00
6 Medium Lasers (IS) LT 18   6 6.00
1 Medium Pulse Laser (IS) HD 4   1 2.00
1 Sword: RA     6 4.00
TOTALS:   69   78 80.00
Crits & Tons Left:       0 .00

Calculated Factors:
Total Cost: 22,939,920 C-Bills
Battle Value: 1,885
Cost per BV: 12,169.72
Weapon Value: 3,815 / 3,815 (Ratio = 2.02 / 2.02)
Damage Factors:    SRDmg = 41; MRDmg = 19; LRDmg = 10
BattleForce2: MP: 4,   Armor/Structure: 6/5
    Damage PB/M/L: 6/4/1,   Overheat: 4
    Class: MA,   Point Value: 19

Created with HeavyMetal Pro


Leave your comment

Your Name: (required)

E-Mail: (required)

Website: (not required)

Message: (required)