Mauler Cr MAL-1CR
BattleMech Technical Readout
Type/Model: |
Mauler Cr MAL-1CR |
Tech: |
Inner Sphere / 3050 |
Config: |
Biped BattleMech |
Rules: |
Level 3, Standard design |
|
|
Mass: |
90 tons |
Chassis: |
Alshain Class 101 Standard |
Power Plant: |
270 Hermes Light Fusion |
Walking Speed: |
32.4 km/h |
Maximum Speed: |
54.0 km/h |
Jump Jets: |
None |
Jump Capacity: |
0 meters |
Armor Type: |
New Samarkand Royal with CASE Ferro-Fibrous |
Armament:
2 Rotary AC/5s
2 Thunderbolt 10s
4 Medium Lasers
Manufacturer: Luthien Armor Works
Location: Luthien
Communications System: Sipher Security Plus
Targeting & Tracking System: Matabushi Sentinel
Overview:
The Mauler is the Federated Commonwealth codename for a Kurita assault ‘Mech just beginning testing at the proving grounds of Luthien Armor Works. The Draconis Combine has high security surrounding this project, and all information is a combination of unconfirmed reports, speculation, and analysis. Not even Our Blessed Order knows the official Kurita designation for this design.
Best intelligence expects the design to be slow but advanced, using an extra-light engine, Ferro-Fibrous armor, and double heat sinks. Several prototypes have been seen, but only in glimpses. Only once has ComStar been able to obtain a photograph for detailed study.
This particular model employs double Victory Nickel Alloy Extended-Range Large Lasers, one in each arm. It also has four Imperator Smoothie-2 Autocannon in the torso, two on each side. Each side of the torso also appears to have a Shigunga Long Range Missile 15-Rack, doubtless also with Cellular Ammunition Storage Equipment for the missile reloads.
Type/Model: |
Mauler Cr MAL-1CR |
Mass: |
90 tons |
Equipment: |
|
Crits |
Mass |
Internal Structure: |
138 pts Standard |
0 |
9.00 |
Engine: |
270 Light |
10 |
11.00 |
Walking MP: |
3 |
|
|
Running MP: |
5 |
|
|
Jumping MP: |
0 |
|
|
Heat Sinks: |
10 Double [20] |
0 |
.00 |
Gyro: |
|
4 |
3.00 |
Cockpit, Life Support, Sensors: |
5 |
3.00 |
Actuators: |
L: Sh+UA+LA, R: Sh+UA+LA |
14 |
.00 |
Armor Factor: |
279 pts Ferro-Fibrous |
14 |
16.00 |
(Armor Crit Loc: 3 LA, 3 RA, 2 LT, 2 RT, 2 LL, 2 RL) |
|
|
Internal |
Armor |
|
|
Structure |
Value |
|
Head: |
3 |
9 |
|
Center Torso: |
29 |
44 |
|
Center Torso (Rear): |
|
14 |
|
L/R Side Torso: |
19 |
28/28 |
|
L/R Side Torso (Rear): |
|
10/10 |
|
L/R Arm: |
15 |
30/30 |
|
L/R Leg: |
19 |
38/38 |
Weapons & Equipment: |
Loc |
Heat |
Ammo |
Crits |
Mass |
1 Rotary AC/5 |
RA |
1 |
80 |
10 |
14.00 |
(Ammo Loc: 2 LT, 2 RT) |
1 Rotary AC/5 |
LA |
1 |
|
6 |
10.00 |
1 Thunderbolt 10 |
RT |
5 |
30 |
7 |
12.00 |
(Ammo Loc: 2 LT, 3 RT) |
1 Thunderbolt 10 |
LT |
5 |
|
2 |
7.00 |
1 Medium Laser |
LT |
3 |
|
1 |
1.00 |
2 Medium Lasers |
CT |
6 |
|
2 |
2.00 |
1 Medium Laser |
HD |
3 |
|
1 |
1.00 |
CASE Equipment: |
LT RT |
|
|
2 |
1.00 |
TOTALS: |
|
34 |
|
78 |
90.00 |
Crits & Tons Left: |
|
|
|
0 |
.00 |
Calculated Factors: |
Total Cost: |
15,834,600 C-Bills |
Battle Value: |
1,751 |
Cost per BV: |
9,043.18 |
Weapon Value: |
2,535 / 2,535 (Ratio = 1.45 / 1.45) |
Damage Factors: |
SRDmg = 37; MRDmg = 31; LRDmg = 7 |
BattleForce2: |
MP: 3, Armor/Structure: 7/5 |
|
Damage PB/M/L: 6/5/1, Overheat: 3 |
|
Class: MA, Point Value: 18 |
Created with HeavyMetal Pro
Leave a Reply